Getting To Know Your Tv; Typical Control Panel; Sleep Timer - Zenith SENTRY 2 Operation Manual & Warranty

GETTING TO KNOW YOUR TV
TYPICAL CONTROL PANEL
The control panel on your TV may differ from the one shown. NOTE: Some TVs have a vertical control panel -- the opera-
tion is the same as described for the control panels shown above.
ENTER (ENT)
Press to see the Channel/Time dis-
play, or to remove any on-screen
display or menu.
SELECT (SEL)
Press during on-screen menu
operations to select a menu op-
tion.
VOLUME (VOL) Up/Down
Press to increase or decrease
the sound level.
OFF-ON
Press to turn TV
power ON or OFF'.
ENTER 4ADJUSTI* SELECT MENU AVOLUMEv OFF/ON
ADJUST (ADJ) Left/Right
Press during on-screen menu op-
eration to see information/status
display for selected option. Press
again to adjust the selected menu
option.
MENU
Press once to see a menu. Press
repeatedly to sequence through
the available menus.
CHANNEL (CH) Up/Down
Press to select channels higher
or lower than the channels be-
ing viewed. You can add chan-
nels to or delete channels
from the scanning sequence
stored in memory of the TV.
See CH. ADD/DEL option
for channel programming in-
formation.
Remote Window
Point the remote
control towards
this window to op-
erate the TV.
SLEEP TIMER
Some remote controls are equipped with a TIMER button that provides access to the SLEEP TIMER available with some TV
models. By using the SLEEP TIMER, you can program the TV to automatically shut offafter a period from 15 minutes up to
4 hours.
To Set SLEEP TIMER
To Cancel the SLEEP TIMER
1. Press TIMER to see SLEEP TIMER display.
2. Press TIMER repeatedly until you reach desired
shut-off time.
One minute before the TV shuts off, the GOOD NIGHT
display appears on the screen. At this time you have a
choice of the following three actions.
1. Do nothing. The GOOD NIGHT display remains on
the screen. The TV will shut off in one minute.
2. Remove the GOOD NIGHT display by pressing EN-
TER (ENT). The TV will still shut off in one minute.
3. Delay the shut offby using TIMER to select a new
shut offtime.
You can cancel the SLEEP TIMER by setting the SLEEP
TIMER status to OFF. Press TIMER repeatedlyuntil OFF
is selected.
NOTE: The SLEEP TIMER resets to OFF when you turn
offthe TV.
SLEEP TIMER
0:15
Sleep Timer Display
SLEEP TIMER
GOOD NIGHT
0:58
"Good Night" Display
2833-O 3-- 1