Advertisement
Allows you toset t hetape length d epending
onthe
tape used: T20=20 minutes, T30=30 minutes,
T35=35 minutes, T40=40 minutes.
•Tape r emaining
time
I_ is correct only if the
correct tape length has been selected.
FULL:
Makes all of the indications
appear on the
LCD monitor/viewfinder
during playback
or
recording.
SIMPLE:
Makes the following
indications
disappear
from the LCD monitor/viewfinder
during
recording
or playback:
rTa, tape remaining
time,
,_1, tape length (_ ,. pg. 9, 17).
Makes the date/time
appear in the camcorder
or on
a connected
monitor
(set DATE/TIME
in SYSTEM
MENU first _,. pg. 7).
• The selected
display will be recorded.
If you do
not want to record the display, select OFF before
shooting.
• In the AUTO DATE mode, the camcorder
records
the date for about 5 seconds
when recording
is
initiated
after the date is changed,
a cassette
is
loaded, or AUTO DATE is selected.
The date is
replaced
after 5 seconds
with "AUTO DATE" but
this is not recorded.
You can record sequentially
at preset time spans.
Leaving
the camcorder
aimed at a specific subject,
you can record subtle changes
over an extended
period of time (Time-Lapse).
REC MODE should
be set to "SP".
(Please note that it is necessary
to set the REC
TIME (Animation)
in the SYSTEM
MENU before
performing
the INT. TIME (Time-Lapse)
function.)
Select the desired interval time and press the
Recording
Start/Stop
Button _).
• Fade- or wipe-in/out
cannot be performed.
• This function
is cancelled
when the power is shut
off or when the cassette
is ejected.
• To use this function,
it is recommended
that
SCROLL
in TITLE SETUP
(__,. pg. 18, 19) be set
to "OFF".
TEL_MACR_
When set to "ON", you can shoot a subject as large
as possible at a distance
of approx. 60 cm.
Depending
on the zoom position, the lens may go
out of focus.
ON: On-screen
indications
are displayed.
OFF: On-screen
indications
are turned off except
Date/Time,
Instant Title and Warning
Indication.
You can shoot a senes of pictures,
each slightly
different,
of the same object for a brief selected
period of time (Animation).
REC MODE should be
set to "SP".
Select the desired recording
time and press the
Recording
Start/Stop
Button _) after focusing
on
the subject.
• Fade- or wipe-in/out
cannot be performed.
• This function
is cancelled
when the power is shut
off or when the cassette
is ejected.
• To use this function,
it is recommended
that
SCROLL
in TITLE SETUP
(_:,. pg. 18, 19) be set
to "OFF".
Advertisement
