Advertisement
W
Recharge
When the RECHARGE indicator flashes, or the
('_,_
unit beeps intermittently, place the handset on
I_ I / _" ) I
the base unit to recharge the battery.
RECHARGE Ill.
__
!_'--_-'_
KX-TCt403a:
for 4 hours,
indicator _
I
KX-TC1402W: for 15 hours.
I11
•,fyou
oo NOTrechar0ethebandse,
IIII Q I
battery for more than 15 minutes, the
RECHARGE indicatorwill continue to flash.
Battery information
After your Panasonic battery is fully charged:
'
While in use (TALK)
Up to about 6 hours _,
While not in use (Standby)
Up to about 10 days
• Battery life may vary depending on usage conditions and ambient
temperature.
• The battery cannot be overcharged.
• Clean the handset and the base unit charge contacts with a
soft, dry cloth once a mont. Clean more often if the unit is
subject to grease, dust or high humidity. Otherwise the battery
may not charge properly.
• If the battery is fully charged, you do not have to place the
handset on the base unit until the RECHARGE indicatorflashes.
This will maximize the battery life.
Calls are transmitted between the base unit and the handset using
wireless radio waves. For maximum distance and noise free
operation, the recommended base unit location is:
Away from electrical
appliances such as a TV,
radio or personal computer.
In a HIGH and CENTRAL
location with no obstructions
such as walls.
If the RECHARGE indicator flashes after being fully charged,
replace the battery with a new Panasonic P-P504 battery.
To order, call the accessories telephone number in section 1-A.
1
3
Remove the cover by
sliding while pressing
the arrow.
Replace the battery, and
close the cover.
Be sure to charge
the new battery.
KX-TC1403B:
for 4 hours.
KX-TC1402W:
for 15 hours•
A nickel cadmium battery that is recyclable powers
the product you have purchased. At end of its
useful life, under various state and IocaJ laws, it is
illegal to dispose of this battery into your municipal
waste stream. Prease call 1-800-8-BATTERY for
information on how to recycle this battery.
@
This unit can be mounted on a wall phone plate.
Wall Phone Plate
Pull down the handset
hook until it locks, so
the tab holds the
handset.
Connect
the AC
adaptor and
telephone
line cord.
Mount the unit, then
slide down.
• Raise the antenna.
Advertisement
