Advertisement
Why is there no sound coming
from the TV?
Why is the sound unusual,
distorted, low volume or in
another language?
Why is there a clicking, ticking or
buzzing sound coming from the
TV unit?
Make
sure the volume
is up and MUTE is off.
Confirm
the TV speakers
are set to ON by pressing
MENU
and
Check that the correct
SAP (Secondary
Audio
Program)is
selecting
"Audio"
->
"Advanced
audio".
selected
by pressing
the SAP button
on the remote
control.
(p. 14)
®
If the TV is connected
to a Panasonic
Home Theater
via HDMI
cable, then check
VIERA Link controls.
(p. 26)
®
If the TV is connected
to a Home Theater
via optical
cable,
then: Check the connection,
the audio system
is on, the
correct
input is selected.
® Check
"HDMI
1 in" or "HDMI
2 in" analog/digital
audio settings.
® Check that the correct
SAP (Secondary
Audio
Program)
is
/:
selected
by pressing
the SAP button
on the remote
control.
/::
@ Check that all connections
of external
equipment
connected
to
/i
the TV are secure.
/i
® When
using Cable
or Satellite
box, check the device's
audio
l!
settings.
(Example:
try changing
the box's
Audio Range
to
"_[ When
TV power is turned
on or shut off, there are electrical
components
that make a click sound. This is normal
operation.
® Changes
in the temperature
and humidity
of the room may
cause thermal
expansion
and contraction
that can produce
sounds.
This is not a sign of faulty operation
or a malfunction.
What
is the
easiest
and
best
way
_l _'
.........
l®
Use an HDMI cable.
It carries
both digital
video and audio
to connect
a High-Definition
Cable!
_1_
signal
in HD. HDMI cable is the only cable needed
to connect
or Satellite
box
to the
TV?
an HD device to the TV.
_
................
_,
_S_
¸*"
/:
® When
viewing
TV via an HDMI connected
device,
such as a
Why
does
the
CC
button
not
_
Cable
or Satellite
box, CC must be enabled
at the device.
display
Closed
Caption?
_
® Closed
Caption
is available
only at supported
TV
,.,_,,,.,,_,. _.o_._,
,,,,_, ,,....................
...............
,,,,.................
,,_, ,,_._,,,,
............
,,_j)
k_,,,._ programming.
The main unit radiates
heat and some of the parts may
become
hot. This is normal
operation
and does not affect the
performance
of the set.
®
Ensure good ventilation.
®
Do not block the ventilation
holes of the TV and do not place
_
the,TJ,,on
topo!o!herequ!pment:
.........................................................................................
Check that the batteries
are fresh, are of the same type and
are installed
with the correct
polarity
(+ & -).
® To operate
other devices,
such as changing
channels
when
using Cable,
or Satellite
boxes,
or operating
non-Panasonic
Blu-ray
players,
use the remote
supplied
with the device.
S--
_'
During "First time setup", you indicated in ANT/Cable setup that
Why
is
themenuat
the
tOpgrayed,out_
ofANWCablethe
andlnput_
unableSelectOpti0nto
be
_t'
you are using Cable or Satellite box and the box is connected to
one of the TV's AV inputs. In this case, the Antenna/Cable
input is
deactivated
to prevent unintentional switching into unused tuner. To
selected?
I
_,
re-activate,
press MENU, select SETUP and repeat "First time setup".
36
Advertisement
