Advertisement
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord
is inserted into a wall outlet and the "Auto power on" is set to "No".
(Press MENU -> Setup -> Advanced
setup -> Auto power on)
Turn the TV on with the POWER
button
(TV)
(Remote)
POWER
POWER
or
Setup the following
items
® Select your language
® Select your viewing
mode (Be sure to select "Home
Use")
if you select "Store Demonstration"
by mistake, confirmation screen will be
displayed.
To display the "Set viewing mode" screen again and select "Home Use", do one of
@ @
the following:
_ -r].
• Press and hold down the side POWER button for at least five seconds.
_
• Unplug power cord for 30 seconds and plug in again.
---,._4
-4
,<
® ANT/Cable
setup
5"
Select and set the settings according to yourANT/Cable
environment.
(_3 (1:)
Select "Yes" on the confirmation
screen, to start the scanning process.
C3 U)
After scanning is finished completely,
press OK to continue,
o
C
® Label the inputs for easy identification
q-'o
To name each input, follow the instructions on screen,
o
c_
When done, select NEXT and press OK to go to the next step.
(input select: Refer to Watching content from external devices (p. 16))
® Adjust
the Clock
Select the clock mode and set other settings.
Complete
First time setup
Completion screen is displayed.
You can repeat the First time setup
° Press MENU -> Setup -> First time setup
To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR,
gaming device, etc.), press the iNPUT button and select the appropriate
input.
i
13
Advertisement
