Installation; Television Location; Optional Cable Connections; Ac Power Supply Cord - Panasonic PT-56SX30 Operating Instructions Manual

INS TA LLA TION
Installation
Television Location
This unit can be used as an entertainment center. Consult your dealer for available options.
(3 Avoid excessive sunlight or bright lights, including reflections.
£1 Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
_3 Fluorescent lighting may reduce remote control transmitting range.
O Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
£1 Use 75-ohm coaxial shielded cables.
£1 Use appropriate input and output connectors, that match your component connectors.
{3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
_MIDESLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Potad7_ed p lug
Non-Polarized plug
Cable / Antenna
For proper reception, either a cable or antenna connection is
required.
Cable Connection
Incoming Cable from
Connect the cable supplied by your local cable company.
Note: A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connections
Cable Company
75 Ohm VHF/UHF
on back of P'FV
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception an outdoor antenna is recommended.
Connect home antenna to ANT1 connection on back of Incoming
Cable from
Home Antenna
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
_ Cable Preset
Cable Mode is preset at the factory,
Antennausers mustchangeto TV Mode and
ANT 1 in the Set Up menu.
im