Table of Contents
Advertisement
Before
unit is brought
out of storage
or
moved
to a new location,
refer again to the
INSTALLATION
section
of these
safeguards,
1 KEEP UNiT WELL AWAY FROM
WATER OR MOISTURE,
such as vases, sinks, tubs, etc.
2 iF EXPOSED
TO RAIN, MOISTURE,
OR STRONG
iMPACT,
unplug unit and have it inspected by a qualified
service technician before use.
3
ELECTRICAL
STORMS
During a lightning storm, or before teaving unit
unused for extended periods of time,
disconnect
all equipment from the power
source as well as the antenna and cable
system.
4 WHEN
UNiT
iS PLUGGED
iN
• DO NOT OPERATE
tF:
- liquid has spilled into unit,
- unit was dropped or otherwise
damaged,
- unit emits smoke, odours, or noises,
Immediately
unplug unit, and have it
inspected by a service technician to avoid
potential fire and shock hazards,
• Never drop or push any object through
openings
in unit. Touching internal parts may
cause electric shock or fire hazard. Do not
put any foreign object on the tray.
• Keep magnetic objects, such as speakers,
away from unit to avoid electrical interference.
5
USING
ACCESSORIES
Use only accessories
recommended
by the
manufacturer
to avoid risk of fire, shock, or
other hazards.
6
CLEAMNG
UNiT
Unplug unit. Use a clean, dry, chemically
untreated ctoth to gently remove dust or debris.
DO NOT USE cIeaning fluids, aerosols, or
forced air that could over-spray, or seep into
unit and cause electrical
shock. Any substance,
such as wax, adhesive tape, etc. may mar the
cabinet surface. Exposure to greasy, humid, or
dusty areas may adversely affect internal parts.
SAFE ANTENNA AND CABLE
CONNECTION
An outside antenna or cabte system must be
properly grounded to provide some protection
against built up static charges and voltage.
Section 810 of the National Electrical Code,
ANSI/NFPA
70 (in Canada, part 1 of the
Canadian Electrical
Code) provides information
regarding
proper grounding
of the mast and
supporting
structure, grounding of the lead-in
wire to an antenna discharge
unit, size of
grounding
conductors,
location of antenna
discharge
unit, connection
to grounding
electrodes,
and requirements
for the grounding
electrode.
KEEP
ANTENNA
CLEAR
OF HGH
VOLTAGE
POWER
LINES
OR
CIRCUITS
Locate an outside antenna system well away
from power lines and electric light or power
circuits so it will never touch these power
sources should it
-::\_
ever fall. When
i i- _
installing antenna,
z/Z
i#;_,,,
absolutely
never
_\,,_
_,_TE"_
touch power lines,
ii_':
,tii_2_P_0D_:'TOR,
circuits or other
.............
_://_;_
power sources as
this could be fatal.
,,
..................
_E _'
DO NOT SERVtCE
PRODUCT
YOURSELF
If, after carefully following detailed operating
instructions, the unit does not operate properly,
do not attempt to open or remove covers, or
make any adjustments not described in the
manual. Unptug unit and contact a qualified
service technician.
REPLACEMENT
OF PARTS
Make sure the service technician
uses only
parts specified
by the manufacturer,
or have
equal safety characteristics
as originat parts.
The use of unauthorized
substitutes
may result
in fire, electric shock, or other hazards.
SAFETY
CHECK
AFTER
SERVICING
After unit is serviced or repaired, request that a
thorough safety check be done as described
in
the manufactureCs
service literature to ensure
video unit is in safe operating condition.
7
Advertisement
Table of Contents
