For Your Reference; Important Note - Panasonic PV-27DF64 Operating Instructions Manual

Hide thumbs Also See for PV-27DF64:
Table of Contents

Advertisement

_Check
List
[]
Turn down the volume, then turn this unit, as
well as other equipment
to be connected,
off
before proceeding
with connection.
[]
Do not block ventilation
holes of any equipment
and arrange it so that air can circulate freely.
Enjoying
digital
audio
output
from
the
digital
audio
output
connector
Notes
on audio
output
from
the optical
digital
audio
output
connector
Sound
Disc
recording
Optical
digital
audio
format
output
from connector
Dolby Digital bitstream
Dolby Digital
(1-5.1 ch) or PCM (48 kHz
sampling/16
bit only)"
Linear PCM
Linear PCM (2ch)
48/96 kHz
(48 kHz sampfing/16
bit
16/20/24
bit)
only) *_
Bitstream
or PCM (48 kHz
dts
sampling/16
bit only) _
Dolby Digitai bitstream
Dolby Digital
(1-5.1 ch) or PCM (48 kHz
sampling/16
bit oniy) *_
Linear PCM
48 kHz
Linear PCM (2ch)
16 bit)
Linear PCM
Linear PCM
44.1 kHz sampfing)
*_ The type of audio output from the connector can
be selected by adjusting the Settings for DVD
Operation. (See pages 56-57.)
.2 When "LPCM" is set to OFF in the DVD Main
Menu, only 48 kHz sampling/16
bit is output.
When set to ON, sampling of sound quality
greater than 48 kHz/16 bit is reduced to
48 kHz/16 bit. (See pages 56-57.)
Manufactured
under
license
from
Digital
Theater
Systems,
Inc. US Pat. No's.
5,451,942,
5,956,674,
5,974,380,
5,978,762,
6,487,535
and other U.S. and
world-wide
patents
issued
and pending.
"DTS"
and "DTS
2.0 + Digital
Out" are
trademarks
of Digital
Theater
Systems,
Inc. Copyright
1996,
2003
Digital
Theater
Systems,
Inc. AI! Rights
Reserved.
For your reference:
• Dolby Digital is a digital sound compression
technique
developed
by the Dotby Laboratories
Licensing Corporation.
Supporting 5.1-channel
surround
sound, as welt as stereo (2-channel)
sound, this technique enables a large quantity of
sound data to be efficiently
recorded on a disc.
• Linear PCM is a signal recording format used in
CDs. While CDs are recorded
in 44.1 kHz/16 bit,
DVDs are recorded in 48 kHz/16 bit up to
96 kHz/24 bit.
• tf you have a Dotby Pro Logic Surround decoder,
you wilt obtain the fult benefit of Pro Logic from
the same DVD movies that provide full 5.1
channel Dotby Digital soundtracks,
as well as
from titles with the Dolby Surround mark. For
information
on Panasonic Dolby Pro Logic
Surround Sound Decoders please contact your
local dealer.
IMPORTANT NOTE:
Caution
for optical
digital
audio
output
connector:
• When connecting
an amplifier (with an optical
digital input connector) which does not contain
the Dolby Digital or dts decoder, be sure to
select "PCM" at 'Doiby Digital" and 'PCM" at "dts"
in the Settings for DVD Operation "Selecting
AUDIO OUTPUT"
(see pages 56-57). Otherwise,
any attempt to play DVDs may cause such a high
level of noise that it may be harmful to your ears
and damage your speakers.
• Be sure to refer to pages 56-57 regarding
output
settings of Dotby Digital, dts, and PCM.
• CDs can be ptayed as usual.
• Some dts decoders which do not support
DVD-dts Interface may not work properly with
the unit.
Manufactured
under
license
from
Doiby
Laboratories.
"Doiby,"
'Pro
Logic,"
and the
double-D
symbol
are trademarks
of Dolby
Laboratories.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pv-20df64

Table of Contents