Information - Sanyo PLC-XU4000 - 4000 Lumens Owner's Manual

Chapter 4 Controlling the Projector

Information

This page is to display the basic information of the projector status. Click
Information on the main menu.
Information
Items
Input ............................................Displays selected input and source.
System .......................................Displays selected signal system.
Signal ..........................................Input signal status (Yes, No)
Screen ........................................Displays screen mode.
Lamp status ............................. Displays lamp status with an icon. Refer to the table as shown below.
Security .....................................Displays the security (PIN code lock) status (Yes, No)
PJ time(h) ................................. Displays the accumulated use time of the projector.
Lamp Corres. Value(h) ..... Displays the use time (Corresponding value) of the lamp.
Filter time(h) .......................... Displays the accumulated use time of the filter.
Total power savings ......... Displays the total accumulated power savings and the total amount of
Network
Items
MAC address..........................Displays MAC address of the projector.
IP address ................................Displays the IP address of the projector.

Description
exhausted CO2 from the projector.
Description
Click this button to
update the information.