Setting 3 - Sanyo PLC-XU4000 - 4000 Lumens Owner's Manual

Setting 3

Item Description
Filter counter ...... Displays the filter counter. Reset the time
after filter clean-up. Click "Reset", a con-
firmation display appears, and then click
"OK", the time will be reset.
Filter warning..... Sets the time to indicate the filter warn-
ing message on the screen. (OFF, 1000H,
2000H, 3000H, 4000H, 5000H, 6000H)
Total power savings .. Displays the total accumulated power
savings of the projector and the total
amount of CO2 exhausted from the
projector. Click "Reset", a confirmation
display appears, and then click "OK", the
figures will be reset.
Factory default ... Sets all of the projector control items to
the factory default setting except the fol-
lowing items.
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time
* This function is effective for all the Network settings.
No show Sets the black out image temporarily. (ON, OFF)
Freeze ...................... Sets the image to freeze mode. (ON, OFF)
Closed caption .. Sets the closed caption function.
Closed caption ... Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color ..................... Sets the color of the contents. (Color, White)
Setting up the projector
1