Connecting The Serial Ata (Sata) Cables - Intel DX48BT2 - Desktop Board Extreme Series Motherboard Product Manual

Connecting the Serial ATA (SATA) Cables

SATA cables support the Serial ATA protocol. Each cable can be used to connect one
internal SATA drive to the Desktop Board. For correct cable function:
1. Observe the precaution in "Before You Begin" on page 27.
2. Attach one end of the SATA cable to one of the SATA connectors on the board
(Figure 26, A) and attach the other end of the cable to the SATA drive
(Figure 26, B).
Installing and Replacing Desktop Board Components
Figure 26. Connecting a Serial ATA Cable
47