VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition
Loading system after power on
During booting procedure
Detecting and setting network
After network is setup (system up)
During the upgrade firmware process
Enable audio
Reset and restore
- User's Manual
LED color
Steady red
Steady green, blue and red
Steady green and blue. Blink red till IP
address is confirmed
Blink green every second and steady red
Blink green every second and fast blink red
Steady blue. Disable audio will turn off blue
LED.
There is a button in the back side of the Network
Camera. It is used to reset the system or restore the
factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
- 57 -
www.vivotek.com