IRiver Cover Story User Manual page 10

Inserting/removing the SD card
1. Open the cover on the bottom of the product.
2. Turn the power off, place the SD card (see the figure below) in the
SD card slot, and press it in gently.
3. Press it in once more and the card can be removed.
Recommended SD cards
Brand: SanDisk, Transcend
Insert/remove the SD card while the power is off.
Do not force the SD card. It may cause malfunction and damage to the SD card.
Do not detach the SD card when in use. It may delete data, cause malfunction,
or damage the SD card.
Please do not repeatedly insert/remove the SD card.
If the SD card is not positioned properly, the product may malfunction or the
card may get stuck. If SD cards other than the recommended ones are used, it
may cause malfunction.
The transfer rate of the SD card may differ according to the computer status.
SD cards cannot be formatted using the product. Please format after connecting
the card reader or the product to the computer through UMS.
When formatting a SD card, all the data are deleted. Make sure that the data is
backed up before formatting.
1 0
G e t t i n g S t a r t e d