Removing And Installing Ink Cartridges - Epson PowerLite 83+ Printer Basics Manual

Removing and Installing Ink Cartridges

You can replace a cartridge when the B black or A color ink out light is either
flashing or on. (If you perform these steps when both ink out lights are off, the printer
cleans the print heads as described on page 21.)
Be sure you have a new ink cartridge before you begin. Once you start the ink
cartridge replacement procedure, you must complete all the steps in one session.
Follow these steps to replace ink cartridges:
1. Make sure the printer is turned on and not printing (the Ppower light should be
on, but not flashing), then open the printer cover.
2. Press the B A cleaning button and hold it for about three seconds until the print
head moves left and the Ppower light begins flashing.
3. Pull up the ink cartridge clamp. The
cartridge rises up from its holder. (The
illustration shows color ink cartridge
replacement. To replace the black ink
cartridge, lift up only the smaller clamp
on the left.)
4. Lift the cartridge out of the printer and
dispose of it carefully.
5. Unwrap the new ink cartridge. Then remove
only the yellow part of the tape seal on top.
24
black cartridge color cartridge