Epson Stylus Photo 1200 Setup & User Manual page 29

1. Lower the output tray and slide out the extension. Next, slide
the left edge guide so that the distance between the edge
guides is slightly wider than the width of your paper.
edge guide
2. Fan a stack of paper; then tap it on a flat surface to even the
edges.
3. Load the stack of paper with the printable side up and the
right edge of the paper resting against the right side of the
sheet feeder. Then slide the left edge guide against the edge
of the paper.
printable
side up
Note:
Always load paper into the sheet feeder short edge first.
Setting Up Your Printer
output tray
27