2. Double-click Install Printer Driver/Utility to start the printer
software installation.
3. When the installation is complete, click OK .
EPSON Status Monitor 2 installation starts automatically.
Follow the on-screen instructions.
Note:
If the New Hardware Found screen or any other Wizard appears
when you turn on your computer, click Cancel and follow the steps
above.
Installation time varies depending on your computer.
For information on opening and using the software, see "Printing
Your First Page for Windows" on page 28. See also "Using the
Printer Software for Windows" in the online Reference Guide.
If you use your printer on a network, see "Network Printing" in
the online Reference Guide.
Installing in Windows 98 with USB interface
If you connected your printer using the USB interface, you need
to install the EPSON USB Printer Device Driver and the printer
software included in the printer software CD-ROM. Follow the
instructions in the USB User's Guide that came with your printer.
For information on opening and using the software, see "Printing
Your First Page for Windows" on page 28. See also "Using the
Printer Software for Windows" in the online Reference Guide.
20
Setting Up Your Printer