Vax EVERYDAY TURBO V-041 Instruction Manual page 8

Vax V-041/2 9th.qxd
Rotating Brushbar: Removal & Replacement
2. Pull and lift off the nozzle guard (Fig.7/2).
Fig.7/2
3. Lift and remove the brushbar. Dispose of the old
belt (Fig.7/3).
Fig.7/3
To Replace the Belt or Brushbar
1. Slide the belt on to the motorshaft (Fig.7/4).
Fig.7/4
2. Place the new belt in the area of the brushbar
without bristles (Fig.7/5).
Fig.7/5
8
2/23/05 12:34 PM Page 8
3. With the new belt in place, pull and slide the
brushbar into the nozzle, making sure that the end
caps are in the correct orientation (Fig.7/6A).
Rotate the brushbar manually to make sure belt is
properly aligned (Fig.7/6).
Fig.7/6
4. Re-attach the nozzle guard (Fig.7/7).
Fig.7/7
5. Secure by aligning the three (3) tabs in the base
slots (Fig.7/8).
Fig.7/8
6. Replace all three (3) screws to secure the nozzle
guard (Fig.7/9).
Fig.7/9
A