Fig. 22 Alignment Of Side Edges; Fig. 23 Form Position Setting Mark; Fig. 24 Print Area - Epson MX-80F/T Operation Manual

Fig. 22 Alignment of Side edges

(b) If the cut paper sheet or form is not long enough to align the side
edges, align the top edge of the paper with the form position setting
mark on the tractor unit. (See Fig. 23.)
I

Fig. 23 Form Position Setting Mark

The print area on the cut paper sheet (when printing it with the tractor
unit installed) is shown in Fig. 24.
210
mm (8.3")-216 mm (8.5")

Fig. 24 Print Area

- 1 6 -