Suggested Speed Setting; Dial Setting; Setup Instructions - UniVersal Labeling Systems R-320 Operator's Manual

As tested at the factory, the following are suggested setting of speeds and time delays:
* Conveyor Speed
* Turning Unit
* Applier
Product Spacer
These settings will product approximately
parts per minute production
If speed of any of the above "*" are changed for any reason, comparable changes in the other
settings should be made.
The above speed settings are provided only as guidelines for start-up and may need to be changed
because of variables in voltages, area to area, and other variables over which we have no control.

SUGGESTED SPEED SETTING

SETUP INSTRUCTIONS

DIAL SETTING

_______________
_______________
_______________
_______________
_______________