Sanyo PLC-XU305A - 3000 Owner's Manual page 72

Chapter 7 Controlling the projector

Item Description
Language ................. Sets the language display of projector's on-screen
display menu.
Auto setup ............... Executes the Auto PC Adj, and Input Search function
below according to the each setting after clicking
button.
Auto PC adj. ........Sets Auto PC Adjustment mode.
Input search .......Sets the auto-input signal detection mode.
Auto keystone ...Sets Auto Keystone mode.
Background ............. Sets the screen background when no signal input.
Item Description
Display ....................... Switches on or off the on-screen menu display on the
screen.
Countdown off .... Displays image during the starting up.
Logo ........................... Sets the logo display on the screen during the startup.
Ceiling ........................ Sets the image top/bottom and left/right reversed.
Rear ............................. Sets the image left/right reversed.
Pointer ....................... Sets the pointer form.
Power
management .......... Sets into the selected power management mode if the
input signal is interrupted and no control key is pressed
for the specified period of time.
* The specified time can be set 1 to 30 min.
Item Description
On start ..................... Sets the power-on mode when the AC cord is
connected to the outlet.
Standby mode ........ Sets the network function enable or disable in the
standby mode.
Normal .....Enable
Eco ............Disable
Lamp control ........... Selects the lamp control mode.
Lamp life control .... Sets the lamp life control mode after exceeding the
recommended total use time of the lamp.
Remote control .......... Sets the remote control code.
Key lock ..................... Sets the prohibition of controls either Projector or
Remote control.
Start