UP349BH (WDECT2300) ENG OM
Start
Here!
Installing the Base Unit
1) Connect the AC adapter to the DC IN 9V
jack and to a standard AC wall outlet.
2) Connect the telephone line cord to the
TEL LINE jack and to a telephone socket
on the wall.
For wall mounting, see "Mounting the
Base Unit on a Wall" on page 5.
5/12/04
10:52 AM
Page ii
QUICK START GUIDE
This page is a very condensed version of the Owner's
Manual. It is designed to allow you to get your phone
installed and operating as quickly as possible -
however it does not attempt to explain any of the
advanced features of the WDECT2300 series.
Route the cord.
To AC outlet
To telephone socket
New Zealand
Australia
AC adapter
(supplied)
To DC IN 9V
Make sure the AC
Adapter remains
switched ON at all
To TEL LINE
times. Use only the
Uniden AC Adapter
supplied with this unit.
Telephone line cord
[ ii ]