Epson LQ-1500 User Manual page 31

any time by sending the appropriate command to the printer. The
functions of the individual switches are summarized in Table 1-2.
Function
Switch
2-1
2-2 International character sets (see Table 1-3)
2-3
2-4 Form length
Skip over perforation
2-5
Bell
2-6
2-7 Print mode
SLCT IN signal
2-8
Switches 2-1, 2-2, and 2-3--These switches are used to determine the
default international character set. Appendix C shows the characters
that are included in each of the character sets. Table 1-3 shows the
required switch settings for each set.
Table 1-3. International character set switch settings
2-1
2-2
UP
U P
UP
UP
Down
UP
Down
Up
Down
U P
Down
UP
Down Down
Down Down
Switch 2-4.--Switch
that you will be using. It uses this information to keep track of the
perforation and the top of the form.
Switch 2-5--The LQ-1500 automatically leaves a top and bottom
margin of 1/2 inch on each page if switch 2-5 is in the up position. The
switch tells the printer to skip over each perforation so that nothing is
printed on top of the perforation. This is especially useful for printing
long program listings. Many word processing programs, however,
Table 1-2. Settings
2-3
UP
Down
UP
Down
U P
Down
UP
Down
is used to tell the LQ-1500 the size of paper
2-4
switch 2
for
Down
Up
12 in. 11 in.
On Off
Disable
Enable
Letter quality Draft
Fixed
Not fixed Up
International character set
U.S.A.
France
Germany
United Kingdom
Denmark
Sweden
Italy
Spain
Factory
UP
U P
Up
Down
Down
Down
Down
23