Epson ActionPrinter L-1000 User Manual page 60

Auto
line feed
auto line feed is on (DIP switch 2-4 on), each carriage return
When
code (CR) is automatically accompanied by the line feed code (LF).
Input
buffer capacity
The input buffer stores data from your computer. If you
free your computer for other tasks while the printer prints, change
setting to 8 Kbytes (DIP switch 2-5 on). Before defining user-
the
defined characters, however, be sure to set the switch to 1 Kbyte
(off).
Print direction for graphics
The printer ordinarily prints text bidirectionally for speed and prints
graphics characters unidirectionally for precise vertical alignment.
You can, however, change text printing to unidirectional with the
software command ESC
change graphics character printing to bidirectional with ESC U0. If
DIP switch 2-6 is off, graphics character printing is unidirectional
whether or not ESC
Page length
DIP switch 2-1 lets you select a page length of 11 inches (27.94 cm)
or inches (30.48 cm). If you are using paper
12
long, you can set this switch on. For 11-inch paper
setting is off.
If DIP switch 2-6 is on, you can
U1.
is used.
U0
DIP Switches
want
is 12 inches
that
factory
the
Using the Printer
to
3-9