Chassis Intrusion Header; Tpm Header; Chassis Intrusion Header Signal Names; Tpm Header Signal Names - Intel DH61ZE Product Manual

Chassis Intrusion Header

Figure 19, C shows the location of the chassis intrusion header. This header can be
connected to a mechanical switch on the chassis to detect if the chassis cover is
removed. This switch should be in the open position when the chassis cover is
installed and closed when the cover is removed.
Table 7 shows the pin assignments and signal names for the chassis intrusion header.
Table 7. Chassis Intrusion Header Signal Names
Pin Description
1 Intruder#
2 Ground

TPM Header

The TPM header is shown in Figure 19, D. Table 8 shows the pin assignments and
signal names for TPM header.
Table 8. TPM Header Signal Names
Pin Signal Name
1 CK_33M_TPM_DIP
3 LFRAME#
5 PLTRST#
7 LAD3
9 +3.3 V
11 LAD0
13 No connection
15 +3.3 VSB
17 Ground
19 LPCPD#
Installing and Replacing Desktop Board Components
Pin Signal Name
2 Ground
4 Key (no pin)
6 No connection
8 LAD2
10 LAD1
12 Ground
14 No connection
16 TPM_SERRQ
18 TPM_CLKRUN#
20 No connection
45