Step 2 : Setting Up The Remote Commander - Sony SLV-D370P Operating Instructions Manual

Step 2 : Setting up the remote commander
Insert two size AA (R6) batteries by matching
the + and on the batteries to the diagram
inside the battery compartment.
Insert the negative ( ) end first, then push in
and down until the positive (+) end clicks into
position.
Reattach the cover after inserting the battery.
You can use this remote commander to operate
this DVD-VCR and a Sony TV. Buttons on the
remote commander marked with an orange dot
(.) can be used to operate your Sony TV.
If the TV does not have the [] symbol near the
remote sensor, this remote commander will not
operate the TV.
Remote sensor
TV / DVD.VIDEO
switch
SELECT VIDEO --
SELECT DVD
O0 e _ _o_o I
Q©®
©®®
O®OO
To operate
the DVD player
the V(-!R
your TV
Set TV / DVD.VIDEO switch to
DVD.VIDEO. then press SELECT DVD and point at the remote sensor at the
DVD-VCR
DVD.VIDEO. then press SELECT VIDEO and point at the remote sensor at the
DVD-VCR
TV and point at the remote sensor at your TV
continued
Setting up the remote commander
11
us