Sony HT-6800DP Operating Instructions Manual page 49

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver's memory
To clear See
All memorized settings page 17
Customized sound fields page 32
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both channels driven, fi'om
120 - 20,000 Hz: rated 90 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated outpnt.
Amplifier section
Power
OLIlpUl
1)
(8 ohms 1 kHz, THD 10G)
FRONT2): 120 W/ch
CENTER2): 120 W
SURR2): 120 W/ch
SURR BACK2): 120 W
I ) Measured under the fifllowing conditions:
120 V AC, 6(1Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
MULTI CH IN, Sensitivity: 800 mV
SA-CD/CD, MD/TAPE, hnpedance: 50kiloohms
DVD, VIDEO I, 2
Inputs (Digital)
DVD (Coaxial) Sensitivity:
hnpedance: 75 ohms
VIDEO 2, SA-CD/CD Sensitivity:
(Optical) hnpedance:
Outputs (Analog)
MD_APE (OUT), Voltage: 800 mV
VIDEO 1 (AUDIO OUT) hnpedance: I0 kiloohms
SUB WOOFER Voltage: 2 V
hnpedance: I kiloohm
Reproduction frequency range:
28 20,000 Hz
Tone
Gain levels _+6dB, I dB step
e_
Q.
continued
49us