Sony KP-57WV600 Operating Instructions Manual page 95

General
How to reset TV to
factory settings
J
How to restore Video settings J
to factory settings
How to restore Audio J
settings to factory settings
Cannot cycle through the J
other video equipment
connected to the TV
Cannot operate Menu
Turn on the TV. While holding down the RESETbutton on the remote
control, press the POWER button on the TV. (The TV will turn itself off, then
back on again.) Release the RESETbutton.
Press the RESETbutton on the remote control while in the Video Menu (see
page 72).
Press the RESETbutton on the remote control while in the Audio Menu (see
page 74).
Be sure the Video Label option is not set to Skip (see page 84),
If a menu option appears in gray, this indicates that the TV is in a state in
which the menu option is not available.
Lost password
in 6e paSSw0rd
screen (_epage 80i, enter tt_e
f0Uow g master password:
4357. The master password clears your previous password; it cannot be
used to temporarily unblock channels: .............
LED on front panel is lit J The STAND BY LED (see page 14) blinks when the TV is turned on, then
shuts off when the picture is displayed. If the LED blinks continuously, this
may indicate the TV needs service.
The TIMER LED (see page 14) indicates that the timer is set. When the
timer is set, this LED will remain lit even when the TV is turned off.
94