Notes on Using This Connection
Set up the TV remote
control
to operate
the VCR
Activate
the TV remote
control
to operate
the VCR
Control
VCR functions
with
the TV remote
control
Watch
the VCR
Press W/VIDEO repeatedly
to select
the VCR input
(VIDEO
1 in the
illustration).
Watch
cable channels
Press W/viDE0 repeatedly
to select
the cable input
(VHF/UHF
in the
illustration).
If you have a non-Sony
VCR, you must
program
the remote
control.
See
"Programming
the Remote
Control"
on pages
51-52.
Open
the outside
cover, as shown
on page 50. Then set the A/V
slide switch
to the position
you programmed
for the VCR.
See "Operating
a VCR"
on page 53.
Label Video inputs
to easily
See the instructions
for setting
up Video
Labels on pages
83-84.
identify
equipment
connected
to the TV
27