Networkupdate - Sony BDP-S350 Operating Instructions Manual

Setting list
You can setup the following options.
Icon Explanation
Network Update (page 40)
Updates tile software of tile
player.
Video Settings (page 41)
Makes the video settings
according to the type of
connecting jacks.
Audio Settings (page 44)
Makes tile audio settings
according to the type of
connecting jacks.
BD/DVD Viewing
Settings
(page 46)
Makes detailed settings for BDi
DVD playback.
Photo Settings (page 48)
Makes the photo-related settings.
System Settings (page 49)
Makes the player-related
settings.
Network Settings (page 50)
Make.', detailed settings for
Internet and network.
Easy Setup (page 52)
Re-runs the Easy Setup to make
the basic settings.
.esett,ng (page
Resets the player to the factory
settings.
NetworkUpdate
You can update and improve the functions of
the player.
For information about update functions, refer
to the t_llowing website;
http ://www. sony. net/
1
Select"NetworkUpdate"using ti'/,!,,
andpress ENTER.
The phtyer connects to the network, and
the display asks for confirmation.
2
Select"OK" using<-l-!,, andpress
ENTER.
The player starts downloading, then
updating the software automatically.
When updating finishes, "FINISH"
appears t_r 5 seconds in the fiont panel
display, then the player automatically
turns off.
3
PressI/_ t0 turnon theplayer.
The player starts up with the updated
software.
• The "VUP */9" counter ("*" indicales update
slep) in lhe fi'ont panel display also shows
progrcss of the update.
• You can check the current soflware version by
selecting "System Inli)rnaation" ill the "System
Settiugs" setup (page 49).
• The "Setup" settings remain al)er updating.
• The player inlkmns you of newer soflware version
information when "Sol)ware Updale
Notification" is set Io "On" (default) (page 49).
O
• Do not disconnect lhe AC power cord or network
cable while downloading or updating sol)ware.
• Any operations, including opening the disc tray,
are nol available while updating.
• Downloading times may dit'li:r depending on the
server provider or line status.
• When ell'or messages ou network connections
appear, check the network connections using
"Network Diagnostic" ol "Inlernet Seltings" in
the "Network Settings" setup (page 50).
4O