Sony SLV-677HF Operating Instructions Manual page 43

Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT on the remote
commander to display "L" in the
display window.
• Press SP/EP on the remote
commander to select the tape speed,
SP or EP.
• REC
1
Ir_sert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR._
Search for the point to start recording and press li PAUSE.
3 Press • REC on this VCR and set it to recording pause.
4 To start editing, press the i i PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the • STOP buttons on both VCRs.
4J
Note"
• If you start recording following the procedure above, the VCR won't start recording
with the APC function. Torecord a tape with the APC function, press • REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press II PAUSE immediately after the APC indicator stops
flashing. If you press |1 PAUSE before the APC indicator stops flashing, the APC
function is canceled.
Additional Operations
43