Sony WEGA KV-36FV1 Operating Instructions Manual page 25

Using Your Menus (continued)
Using the AUDIO ._ menu
TRESLE "----J}Ad e°,
BASS Wa_*m J _tr_
BALANCE ,_m=_ll_*m=
EFFECT : OFF
MTS : STEREO
SPEAKER : ON
AUDIO OUT : VARIABLE
_MENU
Move_ Se_ect_}_ Exit_
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 19.
To select the AUDIO .r menu:
Display _ HighlightoI_ mab Select
. NO @ @
5
To restore the factory AUDIO
settings
Press RESET while the AUDIO menu is
displayed.
• Press _ to cycle through your audio EFFECT
options.
• press MTS on your remote control to cycle through
the MTS options.
22
TREBLE Adjust left or fight to decrease or increase higher pitched sound.
BASS Adjust left or right to decrease or increase low pitched sounds.
BALANCE Adjust left or fight to emphasize left and right speaker volume.
EFFECT Press _, or • to cycle through the following audio effects:
Enhanced audio SIMULATED: Adds a surreund-like effect to mono programs.
options SRS: Produces a dynamic three dimensional sound for stereo signals.
AUTO SRS: Automatically detects whether a stereo or mono signal is being
received and switches the TV effect between SRS and SIMULATED.
OFF: Normal stereo or mono reception.
MTS MTS: Press _' or t. to select one of the following options:
Enjoystereo, MONO: Select to reduce noise during stereo broadcasts for areas of weak
blhngualand mono reception.
programs SAP: Select to listen to bilingual broadcast. (Non-SAP programs will be muted
when this feature is selected)
STEREO: Select when viewing a broadcast in stereo.
SPEAKER ON: Select to listen to the sound from the TV speakers with or without a
Custom selection separate stereo system.
of audio output OFF: Select to turn off the TV speakers and listen to the TV's sound only through
source external audio system speakers.
AUDIO OUT AUDIO OUT can only be set when SPEAKER is set to OFF.
Use to control the VARIABLE: Sound output vades according to the TV settings.
TV's volume through Useful when you want to use your TV's remote control to adjust the output of a
a stereo separate audio system.
FIXED: Sound output is held at a fixed level through your stereo.
Use your A/V receivers remote control to adjust the volume.