Autochannel S Can; Language S Election - Sylvania CD130SL8 Owner's Manual

tTAuto Channel Scan
If you switchwires(e.g.,betweenantennaand(ATV) or if you movethe
unit toa differentareaafter the initialsetting,or if you recover t he DTV
channel y ou deleted,you will needto perform auto channel s can.
Beforeyonbegin:
Make sure iftheunit isconnected t oantenna o rcable.
1 Press [SET-UP] to displaythe main menu.
SET-UP
2 Use [Cursor A/Y] to select"CHANNEL SETUP';
then press [ENTER].
e.g.) digital TV mode
-TVSETUP
--
CHANNELSETUP
_GHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OE_
DTVSETUP
3 Use [Cursor A/V] to select your desired preset
type, then press [ENTER].
e.g.) digital TV mode
- CHANNEL SETUP -
ADDtDELETE (DTV)
AUTO PRESET OH (DTV)
AUTO PRESET OH (TV/DTV)
AUTO PRESET CH (CAW)
I CATV _akes approx. S0min.
• When aerial antenna is connected, select
"AUTO PRESET CH (TV)", "AUTO PRESET CH (DTV)" or
"AUTO PRESET CH (TV/DTV)".
• When connected to CATV, select
"AUTO PRESET CH (CATV)'t
• Auto scanning begins.
e.g.) digital TV mode
D25
AUTO PRESETCH(DTV)
[
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
• When you selected "AUTO PRESET CH (TV/DTV)', the
lowest memorized analog channel will be displayed
when the scanning and memorizing are completed.
If there is no analog channel, the lowest memorized
digital channel will be displayed.
Note:
• Ifyou connect the cable system directly, contact the CATV
instafler.
• lfyou press [POWER0 ] or [SET-UP] during "AUTOPRESET
CH",the setting will be caneetecL
• When no channel can be received by "AUTOPRESET CH',
"NO TV SIGNALS" i s displayed on the TV screen.
• Channel setting will be saved even if the power fails.
• If you have Spanish or French menus and need English,
press [SET-UP]. Use[Cursor A/V] to select "IDIOMA" or
"LANGAGE'_ Press[ENTER] to select "ENGLISH"
Press[SET-UP] to remove the main menu.
• With regard only to the digital channel, even after the scan-
ning is complete if you unplug the AC power cord before
turning off the unit by pressing [POWER0], the channel
setting may be lost.
[] Language Selection
Youcanchoose English, S panish, or French asyouron-screen language,
1 Press [SET-UP] to displaythe main menu.
SET-UP
Use [Cursor A/V] to select"LANGUAGE",
then press [ENTER] repeatedly to change the setting.
e.g.) digital TV mode
-- W SETUP -
CHANNEL SETUP
V-CHIP SETUP
_" LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
NGLISH]
SPANOL]
RAN{;AIS]
Press [SET-UP] to exit.
SET-UP
EN