[] Troubleshooting Guide - Sylvania SRTD420 Owner's Manual

If the TV/DVD does not pert\)rm properly when operated as instructed in this O_ner's Manual, check the
TV/DVD, consulting the follm_ing checklist.
Problem Corrective Action
No power * Make sure the po_ er plug is connected to an AC outlet.
• Make sure the power is turned on.
The TV/DVD does not respond to * Check if the power plug is connected to an AC outlet.
the remote control. * Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the TV/DVD.
• Check if the correct mode is selected. If not switch the mode by
pressing SELECT on the remote control,x_ hichever you need.
TV Mode I
Problem
No Picture or Sound
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertica!ly
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
Sound OK, Picture Poor
Picture OK, Sound Poor
Different color marks on screen
Corrective Action
* Try a new channel, if OK, then possible station trouble.
* Make sure the power is turned on.
* Press SELECT on the remote control to select TV mode. Then try
other TV feature.
* Is antenna or cable connected to terminal on the back of the set?
* If outside antenna is being used, check for broken wire.
* If outside antenna is being used, check for broken wire.
* Check *\_rlocal interference
* Check incoming CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* If outside antelma is being used, check for broken wire.
* Check incoming CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* If outside antenna is being used, check for broken wire.
* Check *\_rlocal interference.
* Check incoming CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* Is antenna or cable connected to terminal on the back of the set'?
* If outside antenna is being used, check for broken wire.
* Adjust COLOR control.
* Check incomin_ CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* Is antenna or cable connected to terminal on the back of the set?
* If outside antenna is being used, check for broken wire.
* Check for local interference.
* Check incoming CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* Is antenna or cable connected to terminal on the back of the set'?
* If outside antenna is being used, check for broken wire.
* Adjust CONTRAST & BRIGHT control.
* Check incoming CATV cable for loose or bad connections.
* Try a new channel, if OK, then possible station trouble.
* Is antenna or cable connected to terminal on the back of the set'?
* If outside antenna is being used, check for broken wire.
* Check for local interference.
* Adjust CONTRAST & BRIGHT control.
* Try a new channel, it"OK, then possible station trouble.
* Check for local interference.
* Magnetism from nearby unsealeded speakers or appliances might
affect the color of the TV picture. Move the TV/DVD away from the
speakers or appliances. Tlie TV/DVD can repair itself automatica!lj
by unplugging the TV/DVD pox_er cord, and then plug it in again 30
minutes or so later.
30 EN
0c28