Table of Contents
Advertisement
VlZlOVU37L HDTV10A UserManual
Preparinq
Your
LED
HDTV
ffor
Wall
Mouotioq
To
remove
bhe
stand
base
1.
Unplug all of the cables and cords from
your VU37L HDTV10A.
2.
Place the VU37L HDTVl0A
face down
on a soft and flat surface (blanket, foam,
cloth, etc) to prevent any damage to the
TV.
3.
Push up the plastic panel on the back of
the stand and lift it away once to release.
4.
Remove the eight (8) screws that were
hidden by the panel, while holdim
base.
5.
Carefully remove the stand base.
Now, the VU37L HDTV10A can fit securely to a
mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the TV.
Please make sure to read the
instructions of your specific mount to properly _,
hang the VU37L HDTVl0A.
The pitch of the mounting holes is 400ram
horizontally and 200ram vertically.
The screw type required is metric M6, 1.00ram
pitch. The length of the screws will depend on
the thickness plate being attached to TV set, our
brackets come with different length screws.
To find the perfect mount for the VlZIO VU37L HDTVl0A,
browse VlZlO's certified mount selection at
www.VlZlO.com
or call directly 888-VlZlOCE
(888-849-4623).
Version 3/12/2008
6
www.VlZlO.com
Advertisement
Table of Contents
