Table of Contents
Advertisement
VlZlOVU37L HDTV10A UserManual
Ream
mameL
Oommeotioms
I
I
I I
I
_®
.
,
SERVICE - This custom communication
port is for factory service only. Use of this input for
any
purpose
other
than
factory
authorized
service
will
void
the
manufacturer's
warranty
of this equipment.
HDMI 1 - Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector.
The white color band on the rear of the TV
indicates this connection,
,
.
,
,
,
HDMI 2 - Connect a secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector.
The white color band on the rear of the TV
indicates this connection.
For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here,,
Your
VIZIO
Certified
HDMI
and
HDMI-DVI
cables
are available
for
purchase
from
www,VIZlO,com
or by calling 888-VIZIOCE (888-849-4623),
RGB PC - Connect the video and audio from a computer here, The blue color band on the
rear of the TV indicates this connection. A 1/8" plug stereo cable is needed to connect the
audio out from the computer to the connector in the rear of the TV for audio from computer,
COMPONENT1
(YPb/CbPr/Cr
with Audio L/R) - Connect the source for component video
devices such as a DVD Player or set top box here, From left to right, use white for left audio
and red for right audio inputs, green for Y, blue for Pb (or Cb) and red for Pr (or Cr).
The
green color band on the rear of the TV indicates this connection,
AVl/S-VlDEO
IN - Connect the primary source for composite video devices, such as a VCR
or video game.
Use the white and red connectors
to connect the external audio from the
same source, then use the S-Video or yellow connector to connect the external video from
the same source,
The S-Video,
if connected,
will take priority over AV RCA (yellow)
connector. The yellow color band on the rear of the TV indicates this connection.
OPTICAL
DIGITAL AUDIO OUT - When a digital audio signal is associated with an input
which is selected for viewing, the digital audio associated with digital programming
will be
available on this SPDIF Optical connector for connection to your home theatre system.
The
white color band on the rear of the TV indicates this connection,
,
g,
ANALOG
AUDIO OUT - Connect the audio from the LCD HDTV to an external device, such
as a home theater system, external amplifier or stereo.
Speakers cannot be connected
directly to here, The white color band on the rear of the TV indicates this connection,
DTV - Connect to an antenna or digital cable (out-of-the-wall,
not from Cable Box) for Digital
TV,*
10.
AC IN - Plug-in the supplied AC Power Cord here.
* For digital TV stations in your area visit www.antennaweb,orq,
Version 3/12/2008
10
www.VlZlO.com
Advertisement
Table of Contents
