Table of Contents
Advertisement
VlZIO VP504 FHDTV10A User Manual
UIZIO
Universal
Remobe
Control
The VIZlO Universal Remote Control is a comprehensive
remote that can be used to control up to four
different components.
The remote button functions are explained on the following pages.
Remote LED - Blinks when the remote operates.
This button starts all programming of the Remote Control.
Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
This button selects a programmed DVD player.
Theatre
This
button selects
a programmed
Audio
Receiver/Amp/Home
System.
This button
selects a programmed
cable TV set-top
box or a
satellite TV sebtop box.
This button has been pre-programmed
to select
the codes to
operate the VlZlO HDTV.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode.
When selecting a digital
channel directly use this button for the separation of main and sub-
channels.
For example, channel 28-2 would be selected by the
button sequence 2 8 DASH 2.
NOTE:
This is a programmable
remote supporting up to 4 devices (see TV,
VCR, CABLE, DVD buttons at the top of the remote).
If the remote is not
working with your VlZlO TV, press the TV button on the remote to set the
functions back to TV.
Version 4/8/2008
12
www.VlZlO.com
Advertisement
Table of Contents
