Boot
Use this tab to set the preferred drive sequence in which the Setup Utility attempts to boot the
operating system. By default, the computer searches for boot devices in the following order:
1. Windows Boot Manager
2. Primary Hard Disk Drive
3. Network boot -IPV4
4. External USB hard drive
5. External USB optical drive
6. Network boot -IPV6
Press
to select a device and press F5 or F6 to move it up or down the list.
Figure 2-8. BIOS Boot
Table 2-8. BIOS Boot
Parameter
Boot Mode
Secure Boot
EFI Device First
System Utilities
Description
Option to specify the boot mode of the
computer.
Option to enable or disable secure boot check.
Option to enable or disable using EFI Device
first when booting.
Option
UEFI or Legacy BIOS
Enabled or Disabled
Enabled or Disabled
2-11
0
Need help?
Do you have a question about the Aspire S7-391 and is the answer not in the manual?