Casio FX-9750G PLUS User's Manual & Technical Reference page 423

k k k k k Using Statistical Calculations and Graphs in a Program
P.250
Including statistical calculations and graphing operations into program lets you
calculate and graph statistical data.
u u u u u To set conditions and draw a statistical graph
Following "StatGraph", you must specify the following graph conditions:
• Graph draw/non-draw status (DrawOn/DrawOff)
• Graph Type
x
• -axis data location (list name)
y
• -axis data location (list name)
• Frequency data location (list name)
• Mark Type
• Graph Color
CFX
The graph conditions that are required depends on the graph type. See "Changing
P.252
Graph Parameters".
• The following is a typical graph condition specification for a scatter diagram or
xy
Line graph.
S-Gph1 DrawOn, Scatter, List1, List2, 1, Square, Blue _
In the case of an
xy
" Line".
• The following is a typical graph condition specification for a normal probability
plot.
S-Gph1 DrawOn, NPPlot, List1, Square, Blue _
• The following is a typical graph condition specification for a single-variable
graph.
S-Gph1 DrawOn, Hist, List1, List2, Blue _
The same format can be used for the following types of graphs, by simply
replacing "Hist" in the above specification with the applicable graph type.
P.254
Histogram: ...................... Hist
Median Box: ................... MedBox
Mean Box: ...................... MeanBox
Normal Distribution: ........ N-Dist
Broken Line: ................... Broken
Using Calculator Functions in Programs
xy
line graph, replace "Scatter" in the above specification with
20- 13
395