Download Print this page

Canon POWERSHOT SD3500IS DIGITAL ELPH User Manual page 65

Advertisement

Troubleshooting
Cannot
magnify!tCannot
rotatelCannot
modify
imagetCannot
register
this
image!/Cannot
modifylCannot
assign
to category
....
.... I ncompatible
images cannot be magnified (p. 1 !2), Tagging
Images as
Favorites (p. 123), rotated (p. 125), edited (pp. !26 - 130), registered
to the
start-up screen (p. 139), categorized
(p. !22), or added to a print list (p. 133).
.... I mages manipulated
on a computer,
that have had their file name changed,
or
have been taken with a different camera may not be magnified,
rotated, edited,
registered
to the start-up screen, categorized,
or added to a print list.
.... Movies cannot be magnified (p. 1 !2), edited (pp. 126 - 130), added to a print list
(p. !33), or registered to the start-up screen (p. 139).
Exceeded
selection
Hmit
.... You chose more than 998 images in print settings. Choose less than 998
images (p. 135).
.... P rint settings could not be saved correctly.
Reduce the number of selected
images and try again (p. 135).
Communication
error
.... I mages could not be transferred
to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially
available
USB card reader to transfer the images. Insert the
memory card into the printer's card slot to print.
Naming
error!
.... The folder or image could not be created because there is an image with the
same file name as the folder or image that the camera is attempting to create, or
the highest possible file number has already been reached,
in the _1' menu,
change [File Numbering] to [Auto Reset] (p. 140) or format the memory card
(p. 5! ).
Lens
Error
.... This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
.... i f this error message continues to appear, contact a Canon Customer
Support
Help Desk as there may be a problem with the lens.
A camera
error
was
detected
(Error
number)
.... i f an error code appears directly after taking a picture, the shot may not have
been recorded. Check the image in Playback mode.
.... i f this error code reappears,
note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
160

Advertisement

loading

This manual is also suitable for:

Ixus210Digital elph