Power Saving Function - Canon POWERSHOT A650 IS User Manual

I
Components Guide I
41
J Indicators
The indicators on the back of the camera will light or blink under the
following conditions.
• Upper Indicator
Green: Ready to shoot (camera beeps twice)
Blinking Green: Image recording/reading/erasing/transferring (when
connected to a computer/printer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning), charging
flash
• Lower Indicator
Yellow: Macro mode/Manual focus mode/AF lock mode
Blinking Yellow: Focusing difficulty (camera beeps once)
A'h Never do the following while the indicator blinks green. These
y actions may corrupt image data.
- Shake or jolt the camera
Shut off the power, or open the memory card slotJbattery
cover
_ Power Saving Function
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again to
restore power.
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after
Shooting Mode the last control is accessed even if [Auto Power
Down] is set to [Off]. Press any button other than
the power button or change the camera
orientation to turn the LCD monitor back on.
Playback Mode Powers down approximately 5 minutes after the
Connected to a Printer last control is accessed on the camera.
* This time can be changed.
_] • The power saving function will not activate during an Auto
Play or while the camera is connected to a computer.
• The power saving function settings can be changed (p. 47).