Advertisement
J185
Subject is too close, making
® Shoot with the subject within the
the flash too strong,
correct flash range when using the
built-in flash (p. 207).
The subject is overexposed
® Set the exposure compensation to a
because the surroundings
negative (-) setting (p. 97).
are too dark.
® Use the AE Lock or spot metering
functions (pp. 95, 98).
Too much light is shining
® Change the shooting angle.
directly into the camera, or
is being reflected off the
subject.
...............
m
ISO Auto) setting may increase
image noise. For higher image
c u -
quality, use as low an ISO speed as
_"
possible (p. 71).
_-
;®InI_, I_1, I gl,i_l,m, D and D,
o
the ISO speed increases and noise
_5"
can appear.
Light from the flash has
® This is a phenomenon that occurs
reflected off dust particles or
with digital cameras and does not
insects in the air. This is
constitute a malfunction.
particularly noticeable when
shooting using the wide
angle.
Advertisement
