For Macintosh Computers - Epson 750 Setup & Daily Use

For Macintosh computers

To use this printer, your Apple
following system requirements. You also need a standard Apple
System Peripheral-8 cable (8-pin mini-circular connector) or
equivalent.
If you want connect your printer to a USB port, you need an iMac
computer with a USB port; and a shielded USB cable.
Applicable computer models (as of September 1, 1998)
Macintosh LC475, LC575, LC630
Macintosh Quadra Series
Macintosh Centris Series
Macintosh PowerBook™ Series (PowerBook 190, 520, 540, 550
or later)
Macintosh PowerBook Duo 280, 2300c/100
Macintosh Performa 475, 575, 588, 630, 5210 or later
Power Macintosh Series
iMac Series (for USB)
Environment
Minimum system
System 7.5.1
5MB of available memory
10MB of available memory when
background printing is turned on.
Note:
The amount of available memory varies according to the number and
kind of applications that are open. To see how much memory is
available, choose About This Macintosh from the Apple menu and
refer to the memory size (listed in kilobytes) under "Largest Unused
Block" (1,024K=1MB).
6
Setting Up Your Printer
® ®
Macintosh must meet the
Recommended system
System 7.6 or later
16MB or more of available
memory
25MB of available memory when
background printing is turned on.