Canon POWERSHOT SD750 DIGITAL ELPH User Manual page 116

If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in
mode.
Incompatible image has
been selected as the
start-up image in the My
Camera settings.
oChange the start-up image in the My
Camera settings (p. 110) or use the
supplied software program
ZoomBrowser EX or ImageBrowser
to restore the default settings. See
ZoomBrowser EX/ ImageBrowser
Software User Guide (PDF).
The image in the LCD
monitor will darken in
strong sunlight or bright
light.
oThis is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. (This
image will not be recorded when
shooting still images, but it will be
recorded when shooting movies.)
Display flickers when
shot under fluorescent
lighting.
oThis is not a camera malfunction
(flickering recorded in movies, but
not in still images).
This may occur when
shooting a bright subject,
such as the sun or a light.
oThis is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. This bar
of light will not be recorded when
shooting still images, but it will be
recorded when shooting movies.
114