Canon POWERSHOT SD750 DIGITAL ELPH User Manual page 130

Hide thumbs Also See for POWERSHOT SD750 DIGITAL ELPH:
Table of Contents

Advertisement

You may be able to check the charge state depending upon how
the terminal cover is attached (Fig. C, D).
Fig. C
Fig. D
R
=>o >
e,z
Charged
Battery
Attach it so the A
is visible
o,<
Spent Battery
Attach it the
opposite way to
Fig. C.
• You are recommended
to use it in the camera until it is
completely
discharged
and to store it in an indoor location
with low relative humidity and between the temperatures
of
0 - 30 °C (32 -86
°F).
Storing a fully charged battery for long periods of time (about one
year) may shorten its life cycle or affect its performance.
If you do
not use the battery for long periods of time, charge it fully and
discharge it fully in the camera about once a year before
returning it to storage.
• Since this is a lithium-ion battery, you need not completely
discharge
it before recharging.
• It takes approximately
1 hour 30 minutes to fully charge the
battery from a depleted state (based on Canon's testing
standards).
, Charging it within a temperature
range of 5 - 40 °C (41 - 104
°F) is recommended.
• Charge times may vary according to the ambient temperature
and the battery's charge state.
• You are advised to charge the battery on the day of use, or
one day before, to ensure a full charge.
Even charged batteries continue to discharge naturally.
• If the performance
of the battery diminishes substantially
even when it is fully charged, its life has been exceeded and
it should be replaced.
128

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents