Advertisement
Using the separately
sold Stereo AV Cable AVC-DC400ST
(p. 213), you can
connect
the camera
to a TV to view images
you have shot.
Turn off the camera and TV.
Connect the camera to the TV.
Open the camera's
terminal
cover and fully
insert the cable plug into the camera's
terminal.
...................................................................................
Whiie
Red
Insert the cable plug fully into the video
.Yellow_""_
t'/.
__
Yellow _
_
@
input terminals
as shown
in the illustration.
"-:1
Turn on the "IV and switch it to the
Red
_
input the cable is connected to.
f7
..............................
Turn on the camera,
Press the []
button to turn on the camera.
The image will appear
on the TV (nothing
will appear
on the screen of the camera).
After you finish, turn off the camera
and
TV, and unplug
the cable.
Images will not display correctly if the camera's video output setting (NTSC/PAL)
does not match the TV system. Press the MENU button and choose [Video
System]
in the ?T tab to switch to the correct video system.
174
Advertisement
