Canon POWERSHOT A810 User Manual page 144

Battery Charger CB-2LD
iMPORTANT SAFETY iNSTRUCTiONS-
SAVE THESE iNSTRUCTiONS.
DANGER-TO REDUCE THE RISK OF
FiRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
iNSTRUCTiONS.
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet, if needed.
i Battery Charger CB-2LDE
i ln normal use, keep the LED side face-up.
iThe adapter can be used with a power supply between 100 and 240 V AC.
Contact your Canon dealer for information about plug adapter for overseas use.
For U.S.A. customers only: For areas where 120 V AC power is not used,
you will need a special plug adapter.
For only United States
Use a UL listed, 1.8-3m(6-10ft), Type SPT-2 or NTSPT-2, AWG no.18
power supply cord, rated for 125V 7A, with a non-polarized NEMA 1-15P
plug rated for 125V 15A.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perch orate/for deta s.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
D SPOSE OF USED BATTER ES ACCORD NG TO LOCAL REGULAT ON.
180