Canon POWERSHOT A2400IS User Manual page 79

Initial Preparations
Charge the battery.
For CB-2LD: Flip out the plug ((_) and plug
the charger into a power outlet ((_).
For CB=2LDE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
The charging lamp turns orange and
charging begins.
When the charging is finished, the lamp turns
green.
.... Remove the battery.
After unplugging the battery charger, remove
the battery by pushing it in ((_) and up (@).
To protect the battery and keep it in optima[ condition, do not charge
it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
i_iis_ _arging_i_ a n_ _ _L=_b_;_h _ _;_dii_ 0_ii_e ......................
_" possible with a fully charged battery, see '=Specifications" in the Getting Started
guide.
/
_, Inserting the Battery
Insert the included battery.
Open the cover.
Slide the cover ((_) and open it (@).
17