Canon POWERSHOT A2400IS User Manual page 49

AF Frames
Shooting in Smart Auto Mode
Focus.
Press the shutter button halfway. The camera
beeps twice after focusing, and AF frames
are displayed to indicate image areas in
focus.
Several AF frames are displayed when
multiple areas are in focus.
V
..........................
Shoot.
Press the shutter button all the way down.
As the camera shoots, a shutter sound is
played, and in low-light conditions, the flash
fires automatically.
Your shot remains displayed on the screen
for about two seconds.
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
_1"_ To restore camera sound if you have accidentally deactivated it (by
holding the v button down while turning the camera on), press the
MENU button and choose [Mute] on the _'T tab, and then press the
4_ buttons to choose [Off].
To activate the screen when the camera is on but the screen is blank,
press the ,v button.
49