Canon POWERSHOT A1000IS User Manual page 118

The functions listed in the _1' tab are useful functions that you can set for normal
usage. You can set them in the Shooting or Playback mode, by pressing the Q
button.
Turning Off the Start-up image
You can turn off the start-up image that displays when you turn on the
camera.
Select [Start-up Image], then press the 4_
buttons to select [Off].
T.r.i. 9 off the Power Saving Function
You can set the power saving function (p. 42) to [Off]. However, setting to
[On] is recommended to save battery power.
Choose [Power Saving], then press the @
button.
Press the Av buttons to select [Auto Power
Down], then use the 4_ buttons to select [Off].
If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
118