Epson ActionPrinter 3250 Manual page 2

ActionPrinter 3250
Single sheets (Manual insertion):
Width 148 to 257 mm (5.8 to 10.1 inches)
92 lo 364 mm (3.6 to 14.3 inches)
Thickness 0.065 to 0.14 mm (0.0026 to 0.0055 inches)
weight 52 to 90 g/m
Continuous paper:
Width 101 to 254 mm (4 to 10 inches)
Two sheets (one original plus one copy)
Copies
Thickness 0.065 to 0.18 mm (0.0026 to 0.007l inches) total
Weight 52 to 82g/m
40 to 58g/m
forms
Use only two-part carbonless multi-part forms and
l
use them only with the optional push tractor.
Note: You can use recycled paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Labels:
Size 101 to 254 mm (4 to 10 inches) width for backing
sheet
63.5 x 23.8 mm (2 1/2 x 1 5/16 inches) minimum for a
label
Thickness
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
Weight
68 g/m
push tractor.
Use labels onIy under normal temperature and
l
humidity conditions.
Envelopes:
Size No.6 166 x 92 mm (6.5 x 3.6 inches)
240 x 104 mm (9.4 x 4.1 inches)
No. 10
Thickness
0.16 to 0.48 mm (0.0063 to 0.0197 inches)
45 to 75g/m
Use envelopes only under normaI temperature
l
and humidity conditions.
Load enveIopes with the longer side inserted into
l
the rear slot by manual insertion only.
Printable
area:
Single sheets (paper cassette and
A The minimum lop margin is 8.5 mm (0.33 inches).
B The minimum left margin is
The minimum right margin is:
mm inches) for the A4-size paper cassette
3.8 (0.15
mm (0.38 inches) for the letter-size paper cassette
9.7
mm (0.12 inches)
3
However, the maximum printable width is 203 mm (8 inches).
C The minimum bottom margin is
AP-3250-2
2
(14 to 24 lb)
2
(14 to 22 lb) for one sheet
2
(12 to 15 lb) per sheet in multi-part
2
(17 lb)
2
(12 to 20 lb)
manual insertion) and envelopes
A
printable area
mm inches).
3 (0.12
manual insertion
for
mm (0.53 inches).
13.5
Continuous paper
The minimum top and bottom margins above and below the perforation
A
9 mm (0.35 inches).
B The minimum left and right margins am 13 mm (0.51 inches).
The maximum printable width is 203 mm (6 inches).
Mechanical
Paper-feed methods:
MTBF:
Print head life:
Dimensions and weight:
Electrical
120 V model:
Bated voltage:
Input voltage range
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Dielectric strength:
220-230 V model:
Rated voltage:
Input voltage range:
Rated frequency range:
Power consumption:
Dielectric strength:
240 v model:
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Dielectric strength:
3 / 1 7 / 9 2
Friction (paper cassette and manual insertion)
Push tractor (optional)
Black ribbon cartridge S015032
Life expectancy : 2 million character at
48 dots/character
4000 power-on hours (10% duty)
100 million strokes/wire
Height 130 mm (5.1 inches)
Width 375 mm (14.8 inches)
Depth 252 mm (9.9 inches)
Weight 4.5 kg (10 lb)
AC l20 V
AC 103.5 to 132 V
50 to 60Hz
49.5 to 60.5 Hz
1.1 A
30 W (during self-test printing in draft mode at
10 cpi)
AC 1 kV rms, 1 second (betwem AC line and chassis)
AC220-230V
AC 198 to 244 V
50 to 60 Hz
49.5 to 60.5 Hz
0.6 A
30 W (during self-test printing in draft mode at
10 cpi)
AC 1.5 kV rms, 1 second (between AC line and
AC 240V
AC 216 to 264V
50 to 60 Hz
49.5 to 60.5 Hz
0.6 A
30 W (during self-test printing in draft mode at
24-Pin Printers
are